High Wear Resistance Tungsten Carbide Snow Plow Bits hard alloy
tool part
Factory introduction
Zhuzhou Mingri Cemented Carbide Co.,Ltd is opening new and bigger
markets, we have many good show as below:
1,We did some Trade Assurance order on alibaba, keep customer can get good quality products and
efficient delivery time.
2, Mingri overseas team attend many different country fair show
each year, like Germany, Russia, Brazil, Australia, India, etc, and
got good feedback for the Good impacting Tungsten Carbide mining insert tips for drilling
hard materials
Application
Snow plow inserts are made by hard compound refractory metal shovel the snow and the
bonding metal by powder metallurgy technology made of an alloy
material. Cemented carbide snow plow inserts with high hardness,
wear resistance, good strength and toughness, heat resistance,
corrosion resistance and a series of excellent properties,
especially its high hardness and wear resistance, even at 500 ℃
temperature basic remains the same, there are still very high
hardness at 1000 ℃. Hard alloy are widely used as a cutting tool
material, such as turning, milling, planing tool, drilling, boring
cutter, etc., used for cutting cast iron, non-ferrous metal,
plastic, chemical fiber, graphite, glass, stone and ordinary steel,
can also be used for cutting heat resistant steel, stainless steel,
high manganese steel, tool steel and other hard processing
material. New type of hard now hundreds of times of the cutting
speed is equal to the carbon steel.
Grade of Good abrasion resistance for Good impacting Tungsten Carbide mining insert tips for drilling
hard materials
BladeRunner extended wear life blades are premium tungsten carbide
bits designed to extend the wear life of the edge, reducing the
need for blade changes.
These high-strength tungsten carbide bits will bolt to virtually
any snow plow or motor grader and are to be used where the customer
requires longer blade life.
Production Process
To ensure the quality and the requirements of the drawings can be
met before mass production
1st:, Start to prepare the RTP powder as per customer’s requirement
with our wet-grinding machine
2nd, Before mass production, do a trial pressing and sintering using mould,
3rd, Check the appearances and the sizes of the samples with
micrometer, projectors etc.
Test process
1st,Mass production, press the raw materials to shape blanks,
Notes: all carbide stud pins blanks must be passed by semi finished
inspection
2nd,Sinter blanks to finish (HIP) and finished products inspection,
Notes:10 sets of vacuum sintering furnace and 2set of HIP in the
factory ensure the best quality and production capacity.
3rd,Cleaning/tumbling to make the carbide stud pins clean and nice surface.
Feel free to contact aimee if any needs:
Whatsapp/wechat/phone:008618593402651
Facebook:Xiao Aimee
zhuzhou mingri cemented carbide co. ltd
Email:mr009@mrcarbide.com
