Description:
- HIP sintering,have good wear resistance,good impact resistance,high
bending strength.
- Widely used for produce various of motors,electronic progressive
dies and punches.
- Strip products can be used for machining refractory alloy,hard
wood,aluminum section bar,brass rod and cast iron.
- We provide OEM and ODM services.
Grades,properties and application of cemented carbide strips:
Grade-Density(g/cm3)-Hardness(HRA)-T.R.S(Mpa)-Application recommend
| Grade | Density
g/cm3 | T.R.S
MPα | Hardness
HRA | Properties & Applications | Approx Grades in China |
| YG6 | 14.9 | 2400 | 90.5 | Good wear resistance,suitable for machining hard wood,raw
wood,aluminum section bar,brass rod and cast iron. | YG6 |
| YG6A | 14.8 | 2000 | 92.5 | Wear resistance higher than YG6,suitable for machining hard
wood,raw wood,aluminum section bar,brass rod and cast iron. | YG6A |
| YG8 | 14.7 | 2800 | 89.8 | High wear and impact resistance,suitable for machining dry
wood,soft wood and non-ferrous metal section bar. | YG8 |
| YS2T | 14.2 | 2400 | 92.0 | Fine grain alloy,with high wear reistance,bending strength,bonding
resistance and thermal strength.It’s suitable for machinng
refractory alloys,stainless steel,high manganese steel and etc. | |
| YS25 | 13.0 | 2200 | 91.0 | Wear resistance and strength comparatively higher,suitable for
machining cast iron,non-ferrous metal and non-metallid materials. | |
| YL10.2 | 14.4 | 3000 | 91.8 | Wear resistance and strength comparatively higher,suitable for
machining cast iron,non-ferrous metal and non-metallid materials. | |
Other grades of cemented carbide blanks for cold-forging dies may
be offered by customers' requirements
|
Package:
All our package are inner package to ensure the products won’t get
hurt between each.
First,packed in small box fixed with cotton or foam.Then packed in
a big carton or use wood carton box if it needed.
Packed as clients request.
Company profile:
Located in Liyu industrial area,Zhuzhou city,Hunan
province,China.Zhuzhou Mingri Cemented Carbide Co.,Ltd owns an area
of over 30000 sm,we have up-to-date production lines,advanced
facilities,a staff of over 130 professional and technical staff.We
also have been awarded of ISO9001:2008 and ISO14001:2004
certificates.
Our main products including tungsten carbide dies for screws and
nuts,TBM cutter bits,percussion bits,tungsten carbide
plates,strips,rods,saw tips,buttons,sealing rings and etc.We have
customers throughout China,Europe,America,Austrilia,Japan,Taiwan
and Southeast Asia.
Advanced production line ensure all our customer’s demands,over 50
tons production capacity,strictly quality control,keep strictly of
bulk delivery date,with which,we can gained a very good reputation
in Tungsten carbide industry !
We are looking forward to cooperating with you.
Our advantages:
1.Strong R&D team. Professional engineers serve for clients,
recommending product and grades as per your applications. We also
offer after-sale service.
2. Strong Mould R&D team. We support customization of products
as per requirements, and ensure high working efficiency and product
quality.
3. Successful cooperation case: We cooperate with clients in
domestic and abroad, and get good feedback from them.
