sharp cutting edge tungsten carbide disc slitter with 12 holes for
silicate board cutting
Product description of carbide disc slitter
1, Product name : carbide disc slitter for wet silicate board
cutting
2, The cutting edge is angle 12 degree, two sides polished.
3, Size: OD 300mm × ID 160mm × T 3.3mm
4, Hole: 12 holes with D 8MM
5, Angle cutting : 12 degree or 18 degree, single angle cutting or
double
6, Surface treatment: parallelism 0.4, flatness 0.2
7, Raw material: 100% virgin tungsten carbide
| Grade | Density | T.R.S | Hardness | characteristics and Application |
| g/cm3 | ≥ N/mm2 | HRA |
| MR09 | 14.75 | 2800 | 90 | prefessionally cut silicate board |
Production flow of carbide disc slitter
1. About raw materials and powder:
Soon after the order is confirmed, our production will start to
prepare the RTP powder as per customer’s requirement with our
wet-grinding machine.
2. About pressing:
Before mass production, we need to do a trial pressing and
sintering using every mould, and we check the appearances and the
sizes of the samples with micrometer, projectors etc. to ensure
that the requirements of the drawings can be met before batch
production;
3. About Furnace:
12 sets of vacuum sintering furnace and 1set of HIP in the factory
ensure the best quality and production capacity.
4. About cleaning/tumbling :
1).cleaning/tumbling is to make the products look more beautiful.
2).The goods can be ground according to customers’ requirement
5 About laboratory:
We sample each batch RTP into pressing and sintering, only when
certificated by the laboratory, the RTP can be put into mass
production.
Company information
230 workers, 8000 m2 non-dust workshop, 18 years experience , 10000 sets mould, 5
workshop included grinding powder workshop, pressing workshop,
sintering workshop, processing workshop, mould production workshop,
production capacity 50tons/month, well-known brand ”Ri Xin” has
registered in Europe for 6 years , ISO, CE&FDA certificated.
Our main products cover cold heading dies, wire drawing dies,
strips and plates, saw tips, brazed tips, disc cutters, round rods,
rock drilling bits and buttons, milling tools, also we can make all
kinds of customized proposal to meet customers’ requirement.
Customer feedback
