K10 K20 YG6 tungsten carbide inserts Cutter produce according to
drawing
Description:
Zhuzhou Mingri Cemented Carbide Co., Ltd is professional
manufacturer in tungsten carbide axle sleeve,
seal ring, spool, valve seat, molds, square sheets, boards, rolls,
inserts, depth drills, saw tips, slitter blade,
thin blade, leather blade, punching molds, decorations, nozzles,
pipe, plunger, mill roller and all kinds of non standard parts. The
company is located in Zhuzhou city which is boasted as the City of
Tungsten Carbide.
Based on the ISO9001:2000 quality assessment system, the expertises
has been operating more than 40
processing machines to meet the production needs. Under the
supervising of the professional technicians
who are honored for the state council special allowance, we have
succeeded in solving all kinds of problems
which could happen during producing the complex non-standard parts,
and gained a good reputation from home and abroad.
PRODUCT FEATURES
1. Grades can be designed according to your requirements and stone
diversity. Our engineers
provide helpful suggestions for you.
2. 100% precise raw material makes longer using life.
3. Precise molds produce products with more accurate dimension.
4. Strict products filtering ensure reaching to qualified standard.
5. Enhancement of processing reduced inferior products, increased
wear resistance.
6. Full selections of types, grades, sizes available, decreasing
your cost and shortening delivery time.
| Grade | Physical& mechanical properties | applications recommended |
Premium grade | Density g/cm³ | Hardness HRA | TRA n/m㎡ |
| YG6 | 14.85-15.05 | ≥89.5 | ≥1670 | It is suitable for the semi-finishing and finishing of nonferrous metals and nonmetallic materials, for finishing of small sections, roughing of threads, and semi-finishing milling and finishing milling of continuous sections and for broaching,etc. |
| YG6X | 14.85-15.05 | ≥91.0 | ≥1560 | This cemented carbide is suitable for maching chilled alloy cast iron and heat resistant alloys with good results. It is suitable
for the finishing of normal cast iron. |
| YG6A | 14.85-15.05 | ≥91.5 | ≥1510 | It is suitable for the semi-finishing of hard cast iron, nonferrous metals and its alloys and it is saso suitable for the
semi-finishing and finishing of parts of high manganese steel. |
| YG8 | 14.65-14.85 | ≥89.0 | ≥1840 | It is suitable for the intermittent rough turning, planing, and
milling of uneven surfaces of non-ferrous metals and nonmetallic materials. And it is also used for drilling of normal holes and
depth holes and for broaching. |
| YG8C | 14.55-14.75 | ≥87.5 | ≥2000 | It is suitable for making rotary percussice drill bits for drilling medium hard and hard rock formation of f=14 and below and auger bits for drilling mining layer overlayed with hard rocks. it is also for making oil drill bits and for percussive drill bits
for driling hard and cutting super hard stones. |
| YG11C | 14.20-14.40 | ≥86.5 | ≥2260 | It is suitable for making drill bits with mining tips or buttons
for heavy duty drilling machines for drilling hard rock formations, various tricone bits. It is also suitable for making drills for
drilling stone walls and cement in construction and installation projects. |
| YG11-N | 14.35-14.55 | ≥87.0 | ≥2420 | It is suitable for making snow ploughs, percussive rotary rock drilling drill bits for drilling medium hard and hard rock
formations. |
| YL10.2 | 14.40-14.55 | ≥90.9 | ≥1610 | With very high TRS and good wear resistance, it is suitable for the low speed roughing and milling of heat resistant alloys, titanium alloys and also for machining fibre reinforced plastics. |
| YS2T | 14.35-14.55 | ≥91.5 | ≥1960 | It is sutable for low speed roughing and milling of heat resistant alloys and titanium alloys and it is optimum for making parting inserts and screwed taps. |
| YS25 | 12.95-13.15 | ≥90.5 | ≥1780 | Suitable for the finishing and semi-finishing of steel and cast
steel and also for the milling of steel and cast steel YS25 is specially used for the milling of steel and cast steel. |
Good service
18 professional sales engineer to provide a full range of alloy
selection of technical and sales support materials;
Minimum quantity, flexibility to meet customers needs at different
stages.
Excellent quality
Through ISO9001: 2008 quality system and ISO9001: 14001
Environmental System Certification;
Hunan, with all the most advanced testing equipment, strict quality
control for the customer;
Customized ERP sophisticated control systems, strict to ensure the
production, delivery accuracy.
Improve marketing and service network
The company's marketing and service network all over the country,
the product quality by the majority of users praise. Including in
Europe and the United States, including the permanent sale of the
company's overseas sales network covering more than 70 countries
worldwide, products are exported to all continents.
