Tungsten Carbide Brazed Tips YT5 / P30 Model A 2200 MPa 12.9 g/cm³
Description:
1,Used for steel, stainless steel, cast steel and cast iron cutting
and processing.
2, Good toughness
3 ,Superior wear resistance & high strength
4 ,A comprehensive range of types with molds
5 ,Short deliver period,with some types always in stock
6,Full-automatic press machine,which brings stable quality and high
efficiency
Specifications:
Type A | unit:mm |
| Type | Dimensions (mm) |
L | t | S | r | a° |
A5 | 5 | 3 | 2 | 2 | - |
A6 | 6 | 4 | 2.5 | 2.5 | - |
A8 | 8 | 5 | 3 | 3 | - |
A10 | 10 | 6 | 4 | 4 | 18 |
A12 | 12 | 8 | 5 | 5 | 18 |
A16 | 16 | 10 | 6 | 6 | 18 |
A20 | 20 | 12 | 7 | 7 | 18 |
A25 | 25 | 14 | 8 | 8 | 18 |
A32 | 32 | 18 | 10 | 10 | 18 |
A40 | 40 | 22 | 12 | 12 | 18 |
A50 | 50 | 25 | 14 | 14 | 18 |
Applications:
| Grade | ISO Code | Density | Hardness | T.R.S | Applications recommended |
| g/cm3 | HRA | MPa |
| YM3 | K05 | 15.1 | 92 | 1400 | Suitable for finishing of cast iron and nonferrous metal. |
| YM6X | K10 | 14.95 | 91.5 | 1800 | The finishing & semi-finishing of cast iron and nonferrous metals and also for the machining of manganese steel and hardening steel. |
| YM6 | K15 | 14.95 | 90.5 | 1900 | Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel. |
| YM8 | K20 | 14.8 | 89.5 | 2200 |
| YW1 | M10 | 13.1 | 91.6 | 1600 | Suitable for finishing and semi-finishing of stainless steel and conventional alloy steel. |
| YW2 | M20 | 13 | 90.6 | 1800 | The grade can be used for the semi-finishing of stainless steel and low-alloy steel and it is mainly used for the machining of railway wheel hubs. |
| YT15 | P10 | 11.4 | 91.5 | 1600 | Suitable for the finishing and semi-finishing for steel and cast steel with a moderate feed rate and rather high cutting speed. |
| YT14 | P20 | 11.6 | 90.8 | 1700 | Suitable for the finishing and semi-finishing of steel and cast
steel. |
| YT5 | P30 | 12.9 | 90.5 | 2200 | Suitable for the heavy duty rough turning of and cast steel with a big feed rate at a medium and low speed under unfavorable working conditions. |
Competitive Advantage:
1. Focusing on manufacturing tungsten carbide products over 13
years.
2. Specialist manufacturer equipped with advanced processing
machines and over160 technicians
3. Over 50 tons/month productivity to assure sustainable supply of
products
4. Owing mould workshop to design & produce moulds for nonstandard
products, and with mould stoc ks over 10 thousand sets for
different products.
5. Full ability to accept OEM & ODM orders
6. Stringent quality control and quality consistency.
7. Professional mechanical & chemical inspecting labs to control
the quality of raw material and
inspect physical & mechanical properties of finished products.
